WAGO 221 Connectors for Panel Wiring

The WAGO 221 series (LEVER-NUTS®) is a compact, DIN-rail-mountable splicing connector built for fast, tool-free panel wiring. With lever-actuated spring clamps, transparent housings for visual conductor verification, and reusable connections, the 221 series has become a standard choice for control panels, switchgear, and industrial automation builds where speed and reliability both matter.

ATEK Distribution supplies WAGO 221 connectors for contractors, panel builders, and government projects nationwide.

Request Pricing on WAGO 221 Connectors
WAGO 221 series lever connector used for panel wiring

WAGO 221 Series Specifications

  • Configurations: 221-2401 (2-conductor inline/splicing), 221-412 (2-lever), 221-413 (3-lever), 221-415 (5-lever)
  • Wire gauge: 24–12 AWG solid, stranded, and fine-stranded conductors (0.14–4 mm²)
  • Voltage rating: 450V (IEC) / 600V (UL)
  • Current rating: up to 32A (IEC); practical UL rating is 20A based on 12 AWG maximum conductor size
  • Temperature rating: up to 105°C continuous operating temperature (T85, 85°C ambient)
  • Mounting: DIN-rail mountable using 221-500 series carriers, or secured directly to panel surfaces

Always confirm exact ratings and configuration part numbers against current WAGO documentation and your project’s electrical specifications before ordering.

Why WAGO 221 Connectors Work Well for Panel Wiring

Panel builders choose the 221 series over standard terminal blocks or wire nuts for a few specific reasons that matter inside a control panel or switchgear enclosure:

  • DIN-rail mounting: 221-500 series carriers snap onto standard DIN rail, keeping panel layouts organized and consistent with other panel-mounted components.
  • Tool-free, faster builds: the lever mechanism opens and closes the spring clamp without crimping tools or twisting, reducing panel assembly time.
  • Visual verification: the transparent housing lets panel builders and inspectors visually confirm each conductor is fully seated before closing the lever.
  • Reusable connections: panels that need future troubleshooting or reconfiguration can have connectors opened and reinserted without damaging the wire or connector.
  • Space efficiency: the compact form factor helps in densely wired panels where terminal block real estate is limited.

Where WAGO 221 Connectors Are Used in Panel Wiring

  • Industrial control panels and automation enclosures
  • Switchgear and switchboard wiring
  • Commercial and industrial lighting control panels
  • HVAC and mechanical control wiring
  • Government and infrastructure panel builds requiring long-term reliability

Looking for panel enclosures, DIN-rail hardware, or control components to go with your WAGO 221 connectors? See our Industrial Control & Automation and Cabinets, Enclosures & Racks product lines.

FREQUENTLY ASKED QUESTIONS

What is the WAGO 221 series?

The WAGO 221 series (LEVER-NUTS®) is a line of compact, lever-actuated splicing connectors available in inline, 2-lever, 3-lever, and 5-lever configurations, commonly used for panel wiring, control panels, and general electrical splicing.

Can WAGO 221 connectors be mounted on a DIN rail?

Yes. WAGO offers 221-500 series carriers that snap onto standard DIN rail, allowing 221 series connectors to be mounted directly inside control panels alongside other DIN-rail components.

What's the difference between WAGO 221-412, 221-413, and 221-415?

The numbers indicate how many conductors each connector accepts: 221-412 connects 2 conductors, 221-413 connects 3 conductors, and 221-415 connects 5 conductors. All use the same lever-actuated spring clamp mechanism.

What's the amperage rating of WAGO 221 connectors?

WAGO 221 connectors are rated up to 32A under IEC standards. For UL applications in the United States, the practical rating is 20A, based on the connector’s maximum 12 AWG conductor size.

Are WAGO 221 connectors UL listed?

WAGO 221 series connectors are UL listed for use in the United States. Always confirm the specific configuration and current documentation match your project’s compliance requirements.

Are WAGO 221 connectors reusable?

Yes. The lever mechanism can be opened and closed repeatedly, allowing conductors to be removed and reinserted without damaging the connector, which is useful for panels that require future modification.

Related Resources

Need WAGO 221 Connectors for an Upcoming Panel Build?

Tell us your configuration, quantity, and timeline — ATEK’s team will confirm availability and contractor pricing quickly.

Request a Quote